Design Blocks in Simulink to Detection Singularity in the Workspace of Gough-Stewart Robot Manipulator

Main Article Content

Hassan Mohammed Alwan
Riyadh Ahmed Sarhan

Abstract

This work deals with Gough-Stewart robot manipulator, which has six degrees of freedom, six actuators, fixed base, and moving platforms. Here, the Jacobian matrix derived to detect the singular point in the workspace for manipulator at determinant of Jacobian matrix equal to zero, then derived the equation of motion from the dynamic analysis by Lagrange method to verify the singular points with Jacobian where the forces increase rapidly at this point. Finally, design blocks in Simulink include the Jacobian matrix and the equations of motion to detection the singularities at any time for current input parameters (X, Y, Z, α, β, γ), where the determinant of the Jacobian equal to zero at maximum forces.

Article Details

How to Cite
[1]
“Design Blocks in Simulink to Detection Singularity in the Workspace of Gough-Stewart Robot Manipulator”, JUBES, vol. 27, no. 1, pp. 1–15, Jan. 2019, doi: 10.29196/jubes.v27i1.1967.
Section
Articles

How to Cite

[1]
“Design Blocks in Simulink to Detection Singularity in the Workspace of Gough-Stewart Robot Manipulator”, JUBES, vol. 27, no. 1, pp. 1–15, Jan. 2019, doi: 10.29196/jubes.v27i1.1967.