Compressive Strength and Physical Properties Behavior of Cement Mortars with addition of Cement Klin Dust

Main Article Content

Auday A Mehatlaf

Abstract

Cement Klin Dust (CKD) was the waste of almost cement industry factories, so that in this paper utilization of CKD as filler in cement and/or concrete was the main objective. CKD from the Karbala cement factory had been used and analysis to know the chemical composition of the oxides was done. In this paper cement mortars with different weight percentages of CKD (0,5,10,20,30,40) had been prepared. Physical properties such as density and porosity were done in different age curing (3, 7, 28) day. In addition, mechanical properties included the coefficient of thermal conductivity and compressive strength had also observed with different age (3,7, and 28) for all prepared specimens. From the obtained the experimental results and their discussion, it was clear that the addition (20%) of CKD had the good results in cement mortars.  

Downloads

Download data is not yet available.

Article Details

How to Cite
[1]
“Compressive Strength and Physical Properties Behavior of Cement Mortars with addition of Cement Klin Dust”, JUBES, vol. 26, no. 1, pp. 114–121, Dec. 2017, Accessed: Apr. 16, 2025. [Online]. Available: https://journalofbabylon.com/index.php/JUBES/article/view/1182
Section
Articles

How to Cite

[1]
“Compressive Strength and Physical Properties Behavior of Cement Mortars with addition of Cement Klin Dust”, JUBES, vol. 26, no. 1, pp. 114–121, Dec. 2017, Accessed: Apr. 16, 2025. [Online]. Available: https://journalofbabylon.com/index.php/JUBES/article/view/1182

Similar Articles

You may also start an advanced similarity search for this article.